How to measure accurately for your Flexiscreens
To measure accurately, you need to decide where you will stick the self adhesive hook side of the VELCRO® brand fastener for your flexiscreens insect screens.
You need a minimum width of 13mm (.5 inch) surface to stick the self-adhesive hook side of the VELCRO® brand fastener.
You measure the aperture (the opening) only. We will add on the amount for the VELCRO® brand fastener when we make your flexiscreens bug screens, unless you indicate otherwise in the comments box on the order page.Have a look at the illustrations to the right
"A" shows a window with the sill level and with architraves that are set back. The hook side of the VELCRO® brand fastener attaches to the frame next to the architrave and flat on the sill.
"B" shows the hook side of the VELCRO® brand fastener attaching to the vertical face.
"C" shows the hook side of the VELCRO® brand fastener attaching to the vertical face of the architrave and flat on the sill.
"D" shows the surface of the "reveal" of the window frame. The VELCRO® brand fastener can attach here, we cut out the corners to fit like the lid of a box. Please tell us when ordering if you require a reveal fit for your flexiscreen.
If you want to give us the finished size of your screens let us know on the order page so that we don't add the amount for the VELCRO® brand fastener.
flexiscreens fly
screens are edged with a cover tape (in your choice of 4
colours). See order
page.
Underneath the cover tape is the mesh, followed by the loop side of the
VELCRO® brand fastener, double stitched for durability.
You will receive a roll of the self-adhesive hook side of the VELCRO®
brand fastener, and easy to follow installation instructions with your flexiscreens
insect screen.
flexiscreens fly
screen can be used for numerous applications provided you have a 13 mm
(.5 inch) width surface to stick the self adhesive hook side of the
VELCRO® brand fastener.
If your window has curved corners
just give us the radius and we can mitre to fit the curve.
When you give us the measurements of your bug screen indicate which
corner(s)
is / are to be mitred. See
sketch of Lobster back below.

If you want to attach your fly screen to the reveal of the frame (this is the surface that is at right angles to the window) just let us know when you order, and we will do the rest.
Cut-outs for locks on security doors or windows and winders are not a problem. See images.